AST RESEARCH, INC.

G-13 RAMPAGE PLUS 286 VER. II & III

Card Type          Memory Expansion
Chipset Controller Unidentified
I/O Options        Feature Connector
Maximum Dram       8MB

[Image]

               CONNECTIONS

       Purpose             Location

  Feature Connector          CN1

                            DRAM CONFIGURATION

      Size          Bank 0        Bank 1         Bank 2         Bank 3

     1024KB       (2) 256K x     (2) 256K x       NONE           NONE
                      9              9

     2048KB       (2) 256K x     (2) 256K x    (2) 256K x    (2) 256K x 9
                      9              9             9

     4096KB       (2) 1M x 9    (2) 1M x 9        NONE           NONE

     8192KB       (2) 1M x 9    (2) 1M x 9     (2) 1M x 9     (2) 1M x 9

                       DEFAULT CONFIGURATION TOGGLE

                Purpose                                 JP3

   Configuration default toggle first            Pins 2 & 3 closed
                position

   Configuration default toggle second           Pins 1 & 2 closed
                position

       Note:This toggle functions as a clearing of the firmware on the
       board. If the jumper is first on Pins 2 & 3 then changing this
       jumper to Pins 1 & 2 will cause the firmware to be erased and
       default values to be loaded. This will then stay until the jumper
       is moved again.

                              ADDRESS SELECT

  Address    JP2/A    JP2/B    JP2/C    JP2/D    JP2/E    JP2/F    JP2/G

  »   0218h   Open     Open     Open     Open    Open     Closed    Open

      0208h   Open     Open     Open     Open    Open     Open     Closed

      0258h   Open     Open     Open     Open    Closed   Open      Open

      0268h   Open     Open     Open    Closed   Open     Open      Open

      02A8h   Open     Open    Closed    Open    Open     Open      Open

      02B8h   Open    Closed    Open     Open    Open     Open      Open

      02E8h  Closed    Open     Open     Open    Open     Open      Open